chiliGREEN ArcSoft TotalMedia 3.5 User Manual
Page 18
ArcSoft TotalMedia™ Manual
16
Edit Channels
View and edit channels for recording from TV.
•
To add channels automatically, simply click "Start." The program will scan through each
channel and determine if there is an available signal. Channels will appear in the channel list.
•
Check "Auto get analog channel name" option to download channel names while channels
are being scanned. It would take more time to scan the channels.
Note: The option is only available when using an analog tuner and when Teletext is
supported in your region.
•
For analog devices, sometimes the automatic scan may not pick up a channel if the signal is
poor. To manually add a channel, click "Add Channel." You can enter the channel number,
as well as a name for the channel.
•
To select the channels, you can click on one by one or using the "Select All" option. Or click
"Deselect All" button to undo the selection. (Checkmarks indicate channels selected.)
•
To rename the channel, click the "A_" icon to access a virtual keyboard.
•
Click the "Delete" (trash can) icon to delete a channel.