Billion Electric Company BiGuard 2 - Manual (Page 103)

103
The first menu screen gives you an overview of which WAN ports currently have QoS
active, and the bandwidth settings for each.
WAN Outbound:
QoS Function: QoS status for WAN outbound. Select Enable to activate QoS for
WAN’s outgoing traffic. Select Disable to deactivate.
Max ISP Bandwidth: The maximum bandwidth afforded by the ISP for WAN’s
outbound traffic.
WAN Inbound:
QoS Function: QoS status for WAN inbound. Select Enable to activate QoS for
WAN’s incoming traffic. Select Disable to deactivate.
Max ISP Bandwidth: The maximum bandwidth afforded by the ISP for WAN’s
inbound traffic.
Creating a New QoS Rule
To get started using QoS, you will need to establish QoS rules. These rules tell the
BiGuard 2/10 how to handle both incoming and outgoing traffic. The following
example shows you how to configure WAN Outbound QoS. Configuring the other
traffic types follows the same process.
To make a new rule, click Rule Table. This will bring you to the Rule Table which
displays the rules currently in effect.