Braun 320 - Manual (Page 7)

8
Description
1 Foil & Cutter cassette
2 Long hair trimmer
3 On/off
switch
4 Charging light (green)
5 Low-charge light (red)
6 Shaver power socket
7 Special cord set
8 Foil protection cap
Charging
The best environmental temperature for charging is between 60 °F to 95 °F /
15 °C to 35 °C. Do not expose the shaver to temperatures higher than
122 °F / 50 °C for extended periods of time.
Using the special cord set (7), connect the shaver to an electrical outlet
with the motor switched off.
When charging for the first time, leave the shaver to charge continuously
for 4 hours.
The green charging light (4) shows that the shaver is being charged. When
the batteries are fully charged, the charging light intermittently blinks on
and off. This indicates that the battery maintains its full capacity.
Once the shaver is completely charged, discharge the shaver through
normal use. Then recharge to full capacity. Subsequent charges will take
about 1 hour.
A full charge provides up to 45 minutes of cordless shaving time
depending on your beard growth. However, the maximum battery capacity
will only be reached after several charging/discharging cycles.
If the rechargeable batteries are discharged, you may also shave by
connecting the shaver to an electrical outlet via the special cord set.
5-minute quick charge is sufficient for a shave.
The red low-charge light (5) glows when the shaver capacity has dropped
below 20% provided the shaver is switched on. The remaining capacity
will then be sufficient for 2 to 3 shaves.
Shaving
Press the on/off switch (3) to operate the shaver (picture).
The flexible shaving foils automatically adjust to every contour of your face
(picture).
•
•
•
•
•
•
•
•
98715706_Floater330_NA_S6-24.ind8 8 98715706_Floater330_NA_S6-24.ind8 8 02.06.2008 16:02:04 Uhr 02.06.2008 16:02:04 Uhr