Comelit FT PLANUX MEMOVIDEO - Manual (Page 27)

27
INTRODUCTION
1 2
3 4 5 6 7 8 9 10
11
12
Sab 05/09/09 16:07
VIDEOFONIA NIA SETUP
1 Audio key
2 Door lock key
3 Menu key
4 Brightness key
5 Contrast key
6 Colour key
7 Programmable key 1
8 Programmable key 2
9 Self-ignition key (programmable)
10 Privacy / Doctor key
11 Touch-screen
12 Key sensor
KEY FUNCTIONS
Menu key: Used to access or exit the Planux Memo
Video monitor menu.
Audio key: Activates or de-activates conversation
with the external unit.
Door lock key: Use this key to open the
corresponding door lock.
Brightness key: Used to adjust the brightness of
the image displayed on the monitor. To change the
setting, press the key while video communication is
in progress.
Contrast key: Used to adjust the contrast of the
image displayed on the monitor. To change the
setting, press the key while video communication is
in progress.
Colour key: Used to adjust the colour of the image
displayed on the monitor. To change the setting, press
the key while video communication is in progress.
Programmable key 1: Factory-set as generic
actuator (programmable).
Programmable key 2: Factory-set as switchboard
call (programmable).
Privacy/Doctor function key (programmable):
• The Privacy function disables calls from the
external unit and switchboard.
• The Doctor function enables automatic activation of the
lock-release in response to a call from the external unit.
• The Privacy + Doctor function, as well as disabling
the door-entry phone ringtone in the same way as the
Privacy function, also enables automatic activation of the
lock-release in response to a call from the external unit.
The red LED indicates that the selected function is
active.
Self-ignition key: Used to switch on the monitor
and display the video feed from the external unit
(programmable).
DESCRIPTION OF THE MONITOR