Comelit MT 6101BM - Manual (Page 50)

ADVANCED
50
EN
SETTING A MONITOR AS MAIN /
SECONDARY
Main Main
Multiple main
Sat 05/09/09 16:07
Secondary
Access the menu Setup > Advanced > Addresses >
Monitor.
Select the setting by pressing the icon to the right of it.
SETTING A MULTIPLE ADDRESS
Minimum address Minimum address
Maximum address
1
2
Thu 21/06/12 - 16:07 0W
1 Set the range start address.
2 Set the range end address.
Access the menu Setup > Advanced > Addresses >
Multiple address.
When the "Multiple address" function is activated, the
monitor will ring every time a Simplebus address within
the set range is called.
SETTING THE INTERCOM ADDRESS
Thu 21/06/12 - 16:07 0W
Select the intercom address you wish to assign to the
monitor.
Access the menu Setup > Advanced > Addresses >
Intercom address.
Observe the limits specifi ed in the installation
diagrams in the Technical manual for Art. 20001001K
(code 2G40000849), and the Technical manual for
Art. 6214C (code 2G40000877 or technical sheet FT/
SBC/22).