Comelit MT IPNVR116A - Manual (Page 8)

8
■
Input the port number
■
Input the user name
■ Input the IPC password, and click "Save" finally
4.4 Channel parameters modification
Double-click the channel parameters which needed to modify on the left "Channel
menu", then input relevant parameters, click"Save", as shown in the below picture:
1
）
Enable: Select the relevant channel, check "Enable"
2
）
Protocol: ONVIF Standard protocol/ I8 Private protocol/ I9 Private protocol/ RTSP
Standard protocol for selection
3
）
IP Add
：
Edit and modify the IP address manually
4
）
Port
：
Edit and set the relevant port number
5
）
Stream Type: Select "Main Stream" or "Sub Stream"
6
）
Network type
：
Select“TCP”or“UDP”
7
）
User
：
Input the user name
8
）
Password
：
Fill the password in the password field