Comelit RAS_SOLUTION - Manual (Page 19)

12
1) Connection status
The Discovery tab shows the devices which are connected to the network by model name, device name,
MAC address, IP address and firmware version. Each icon on the item list displays the results of its
connection test.
Table 3 Discovery List Item Icon
Connection Test Results Results Key
It’s not available to connect
It’s connected
It’s locked and needs ID and password
2) Discovery tools
The device discovering process is able to be controlled by the below buttons.
Table 4 Discovery Tools
Buttons Operations
Begin device discovery
Halt device discovery
Refresh list and restart device discovery
3) Device Type Search
① Select device type for search in combo-box.
② When the device type is selected, corresponding devices in the network are searched and a list of
devices are shown below.
Figure 12 Device Type Search
4) IP filtered device discovery
① Check the IP filter enable button.
② Enter the specific IP address ranges to discover the devices in the network.
③ Click the Apply button. Then the devices are discovered in the specified network address ranges .