CounterPath Bria 3.0 Configuration Guide – Retail Deployments - Manual (Page 15)

Bria 3 Configuration Guide – Retail Deployments
11
Examples
Example 1
\a\a.T|xxxxxxx.T;match=2;pre="9"
This simple example shows how to differentiate between a PSTN number and a SIP address, and to how add a
"9" dialing prefix only to the PSTN number.
Example 2
3xxT|1xxxxxxxxxx|[2-9]xxxxxxxxx|+x.T;match=2;pre="9";match=3;
pre="91";match=4;prestrip=1;pre="9011"
Example 3
#1xxxxxxxT|#19xxxxxxx|xxxxxxxT|9xxxxxxx|;match=1;prestrip=2;pre=9;match=2;prestrip=2;
match=3;pre=9;
This example assumes that the dial plan belongs to the first account.
The dial plan is slightly trivial, because it does not cover all the situations that a dial plan should be designed for
(local calls, long-distance calls, international calls, and so on for the locale).
However, the example does illustrate two ideas:
• Handling of the account prefix (#1), to deal with users who have upgraded from eyeBeam. These users may
have been accustomed to dialing an account prefix to force eyeBeam to use a specific account.
3xxT
The first pattern is any three-digit number beginning with 3. No transformation. The
assumption is that this is an internal extension. The timer forces Bria to wait after
detecting a three-digit number beginning with 3, in case the user is actually dialing a
local call starting with 3.
1xxxxxxxxxx The second pattern is any eleven-digit number beginning with 1. Prefix with 9 and dial
as is. The assumption is that this is a long-distance PSTN call within North America
(within North America, all long-distance calls start with 1).
[2-9]xxxxxxxxx The third pattern is any ten-digit number beginning with a number other than 1. The
assumption is that this is a local PSTN call in a ten-digit dialing zone.
+x.T; The fourth pattern is a number of any length that begins with +, to indicate an
international PSTN call from North America. Delete the +, prefix with 9011 (011 is the
number to access an international line from North America).
match=2;pre="9"; For the second pattern, prefix 9 to access an outside line.
match=3;pre="91"; For the third pattern, prefix 9 and 1 to access an outside line and enter the long-distance
code.
match=4;prestrip=1;pre="9011 "For the fourth pattern, remove the + and prefix 9011 to access an outside line and enter
the international code.
#1xxxxxxxT The pattern is a dialing prefix followed by seven digits. The timer forces Bria to wait to
allow a match to the second pattern. The #1 is stripped off and 9 is prepended to access
an outside line.
#19xxxxxxx The pattern is a dialing prefix followed by a 9 and seven digits. The #1 is stripped off.
xxxxxxxT The pattern is seven digits. The timer forces Bria to wait to allow matching to the fourth
pattern. 9 is prepended to access an outside line.
9xxxxxxx The pattern is a 9 and seven digits. The input is not transformed.