CounterPath Bria 3.0 Administrator Guide User Manual
Page 10
CounterPath Corporation
6
1.4 Deploying through Remote Provisioning:
Recommended Procedure
Configuring Bria: Administrator Steps
If you are deploying through remote provisioning you will need to start Bria without provisioning in order to
explore configuration options.
1.
Install and start Bria. The Bria Login dialog appears with the Profile set to “Manually enter login server”.
Set the profile to “No login required” and click Continue. The softphone GUI appears. From now on, when
Bria starts, the Login dialog will not appear.
2.
Manually configure Bria to work on your network and with your services. Use the Account Settings
window (Softphone > Accounts) and the Preferences window (Softphone > Preferences.
The Troubleshooting Assistant (Help > Troubleshooting) may help you identify problems with your
configuration.
The rest of this manual describes this configuration.
3.
When you are satisfied with the configuration, see the “Bria 3.0 Provisioning Guide - Retail Edition” for
information on setting up your users for remote login and remote provisioning.
4.
In addition, just before you deploy across your enterprise, change the setup for your own Bria to follow the
correct login procedure:
•
Start Bria, go to the Preferences > Application page and check Enable login screen.
•
Shut down Bria and restart. The Login dialog will appear.
•
Choose the appropriate option: “DHCP” or “Manually enter login server” and complete the other
fields. Click Login.