CounterPath Bria Professional 2.5 Provisioning Guide - Manual (Page 22)

CounterPath Corporation
18
3.3 Remote Upgrade
3.3.1 Setting Up
• Set up Bria Professional as described on page 15.
• Set up an upgrade server as follows:
•
You can use a script to include logic that determines a given deployment needs an upgrade. See below
for an example. Obtain the sample upgrade script from CounterPath and modify it to suit your needs.
Or you can skip the script and manually set up your upgrade server to simply provide a success
response when an upgrade is available and a failure response at other times.
• If you are using scripts, set the URL for the upgrade server to include the script and any macros (for
example, the language and the build macros).
• When you want to deploy an upgrade, place it on the “upgrade location”.
3.3.2 How Remote Upgrade Is Performed
Assuming that the timers are not all set to zero, this procedure runs “in the background” for as long as Bria
Professional is running.
Bria Professional Sends a GET
When triggered by the timer, Bria Professional checks for available upgrades by sending a GET to the upgrade
executable server.
• For example, if you are using scripts, the value of feature:auto_update:code_server_url might be:
This URL could result in a GET to your webserver of:
• Or if you are not using scripts, the value is simply the URL of the upgrade server:
Server Response
The upgrade executable server must respond with the following:
or
https://executablepgradeserver.com/exe_upgrade.php?build=$build$&language=$language&name=$loginame$
https://executablepgradeserver.com/exe_upgrade.php?build=38740&language=USEnglish&name=kpereira
https://executablepgradeserver.com
[DATA]
Success=0
<CRLF>