CounterPath Bria Professional 2.3 Administrator Guide - Manual (Page 26)

CounterPath Corporation
22
3.9 SIP Account Properties – Advanced
s
Table 8: SIP Account Properties – Advanced
Field Description
Register Settings
Reregister every The time interval between Bria Professional’s attempts to reregister in order to refresh the account
registration. A value of zero means not to reregister after the initial registration.
This value is placed in the “Expires” header field of the REGISTER message.
The factory setting is 3600.
Minimum time If the reregistration fails, Bria Professional will wait this amount of time, then attempt to
reregister. If the second attempt fails, Bria Professional will wait twice this time and try again,
then four times this time, and so on, until reregistration succeeds.
The factory setting is 20.
Maximum time This is the maximum wait time between attempts to reregister. Once this maximum is reached,
Bria Professional will wait this time for all subsequent attempts.
For example, the min. time is 20 secs, the maximum time is 120 secs. Bria Professional will
attempt to reregister as follows:
• Wait 20 secs.
• Attempt to connect.
• If fail, wait 40 secs.
• Attempt to connect.
• If fail, wait 80 secs.
• Attempt to connect.
• If fail, wait 120 secs (the maximum)
• Attempt to connect.
• If fail, wait 120 secs, and so on.
The factory setting is 1800.
Timers