Account advanced (sip) – CounterPath Bria Android Tablet Edition 2.3 User Guide User Manual
Page 46
CounterPath Corporation
42
Account Advanced (SIP)
Subscribe Refresh
Interval for subscribing your buddy’s status over SIP SIMPLE. Value in seconds. Minimum 30,
default 900.
Enable SMS
ON to send an SMS to PSTN cell phone numbers by using the SIP SIMPLE protocol. Turn ON if
your VoIP service provider supports this feature. The purchase of “Presence and Messaging” is
required to use this feature.
Split Longer Messages
When on, you can type more than 160 characters in one SMS. Bria splits the long message to
multiple SMS and sends them to the SIP server.
Field
Description
Outbound Proxy
If your VoIP service provider has an outbound proxy and requires that you provide that address to
Bria, enter the domain name or the IP address obtained from your provider.
Authorization Name
May not be required. But if it is required, it will be provided by your VoIP service provider.
Send DTMF using
The method used for DTMF, sent when you press a number key when dealing with an auto
attendant (such as “press 1 for customer service”).
Enter the value specified by your VoIP service provider: RFC 2833, SIP Info, or Inband DTMF.
If DTMF tones are not being recognized, trying the other method may resolve the issue. If DTMF
is still not working, contact your VoIP service provider for information about DTMF and IVR.
Also Send Inband DTMF
This applies when RFC2833 or SIP Info is selected as a DTMF method.
When On, inband DTMF is sent in addition to the other two methods (RFC 2833 or SIP Info)
chosen above.
Suppress STUN Wi-Fi
Allows you to control the use of STUN per account.
• On: No STUN is used on this particular account. This setting overrides the STUN Wi-Fi
setting under Advanced Settings (which applies to all accounts); when Suppress STUN Wi-Fi
is ON, no STUN is used on this particular account even if STUN is enabled under Advanced
Settings.
• Off (default): the app decides whether to use STUN depending on the STUN Wi-Fi setting
under Advanced Settings.
Field
Description