CounterPath Bria iPad Edition 2.3 User Guide - Manual (Page 50)

CounterPath Corporation
46
Account Advanced (SIP)
Enable SMS ON to send an SMS to PSTN cell phone numbers by using the SIP SIMPLE protocol. Turn ON if your
VoIP service provider supports this feature. The purchase of “Presence and Messaging” is required to
use this feature.
Field Description
Out. Proxy If your VoIP service provider has an outbound proxy and requires that you provide that address to
Bria, enter the domain name or the IP address obtained from your provider.
Auth Name May not be required. But if it is required, it will be provided by your VoIP service provider.
Send DTMF using The method used for DTMF, sent when you press a number key when dealing with an auto
attendant (such as “press 1 for customer service
” ). In-band DTMF can be sent in addition to the
other two methods.
Choose a method specified by your VoIP service provider.
Suppress STUN Wi-Fi Allows you to control the use of STUN per account.
• ON: No STUN is used on this particular account. This setting overwrites the STUN Wi-Fi
setting under Advanced Settings (which applies to all accounts); when Suppress STUN Wi-Fi
is ON, no STUN is used on this particular account even if STUN is enabled under Advanced
Settings.
• OFF (default): Bria decides whether to use STUN or not depending on the STUN Wi-Fi setting
under Advanced Settings.
Suppress STUN Mobile This setting has the same function as Suppress STUN Wi-Fi, but applies only when you are
connected over the mobile network.
Field Description