CounterPath Bria iPad Edition 1.1.1/1.1.2 User Guide - Manual (Page 57)

Bria iPad Edition User Guide
53
Quality of Service If desired, ask your VoIP service provider if QoS is supported. QoS (Quality of Service)
can allow your phone calls to be given a higher priority on the network. The default is
OFF.
RTP Port Start Change this value only if advised to do so by your VoIP service provider.
This indicates the start of the ports range used for RTP and RTCP sessions. The range is
100 ports wide. The range is not observed if ICE is used. The default is 4000.
Audio Codecs Selection Tap to display more information about these two fields. See page 56.
Verify TLS Cert Applies only if you use TLS as the transport.
• ON (default): Bria attempts to verify the certificate, sent by the SIP server, to see if it
is trusted. For the certificate to be trusted, a corresponding CA certificate, provided by
your VoIP provider, must be installed on your device (using the iPad Configuration
Utility for example).
• OFF: Bria accepts the certificate without attempting to verify it.
Verbose Logging Leave this setting OFF unless customer support instructs you to turn it ON in order to
troubleshoot a problem you are having on your device. See page 59.
Send Log Tap to upload the current log to customer support. See page 59.
Call Statistics To show detailed information about the current/last call. For example, the number of
packets lost.
Field Description