Daisy 840B Black Grizzly User Manual

Page 4

Advertising
background image

UNLOAD PELLET

The bolt does not extract a pellet. You must put the trigger

safety “ON”, pull the bolt back, insert a cleaning rod in the
muzzle end of the gun and push the pellet out. Be careful not
to damage the bolt tip by pushing the rod through too hard.

AMMUNITION

Use only BBs or .177 cal. (4.5mm) pellets that are labeled as

such. DO NOT use buckshot, ball bearings, or other foreign
objects, as they could damage or jam your gun.

PROPER CARE

The exposed metal

parts (barrel, lever,
screwheads, etc.)
should occasionally be
wiped clean, using a
soft cloth lightly oiled
with clean motor oil.
Use a 10, 20, or 30
weight non-detergent
automotive motor oil. DO NOT use light, household-type oils
or aerosol-type spray lubricants, since they may contain sub-
stances or additives harmful to the rubber seals or other com-
ponents.

The pump piston has a felt wiper ring that should occasion-

ally be oiled. Invert the gun and fully open the forearm lever.
You will see “Oil Here” and an arrow pointing to the felt wiper
which can be seen through a slot in the forward end of the
pump tube. Add two drops of oil to the felt wiper after each
2,000 shots. The forearm lever pivot joints should be sparingly
lubricated by occasionally adding one drop of oil to each pivot
point. (Fig. 12)

STORAGE

Unload ammunition and store it in a separate place from the

gun to keep away from untrained shooters. Before putting the-
gun away in a cabinet or gun rack, shoot the gun at a safe
target to make sure the pump system and barrel are empty.
Then, put “ON” trigger safety. Always make sure the gun
isempty and the trigger safety “ON” before storage; also, the
gun should be clean, dry and oiled.

MODIFICATION

WARNING:

The components of this gun were engi-

neered to deliver optimum performance. Any modification of
tampering with a gun may cause a malfunction and may make
it unsafe to use. Any change in performance, such as lowered
trigger force and shortened trigger travel, indicates possible
wear and such gun should be inspected, replaced or properly
repaired by qualified personnel. Any gun that has been
dropped should be checked by qualified personnel to insure
that its function has not been affected.

REPAIR OF DAISY GUNS

WARNING:

A GUN THAT IS NOT OPERATING PROP-

ERLY MAY BE DANGEROUS. IT SHOULD BE KEPT SAFELY
FROM USE BY ANYONE UNTIL REPAIRED OR DESTROYED.
DO NOT TRY TO TAKE THE GUN APART. IT IS DIFFICULT TO
REASSEMBLE, AND IMPROPER REASSEMBLY CAN CAUSE
A HAZARDOUS CONDITION.

FELT WIPER

PIVOT

POINTS

FIG. 12

GUNS IN WARRANTY

LIMITED ONE YEAR WARRANTY

For one year from date of purchase, Daisy will repair or

replace this gun, free of charge, if defective in material or
workmanship. Service is available by returning the gun to
Daisy Outdoor Products. Attach to the gun your name and
address and telephone number, description of problem and
proof of date of retail purchase (sales slip). Package and send
to Daisy Outdoor Products, transportation prepaid. This
Warranty gives you specific legal rights, and you may also
have other rights which may vary from state to state.

GUNS OUT OF WARRANTY

If your Daisy needs repair, call Customer Service at 1-800-

713-2479 for repair or replacement charge. We accept Visa
and Mastercard. When paying by check or money order,
please send with gun. Attach to the gun your name, street
address (Not Post Office Boxes) and description of the prob-
lem. Package and send, transportation prepaid, to Daisy
Outdoor Products, Service Department. Daisy will repair the
gun or replace it with a reconditioned gun of the same model,
if available, otherwise with a model of equivalent quality.

Exploded gun part drawings and price lists are available

from Daisy Service Department. Please make sure you state
model number stamped on barrel. Service and parts charges
are subject to change without notice.

Daisy Outdoor Products
Service Department
308 West Stribling Drive
Rogers, AR 72756

NOTE: We recommend returning guns via UPS.

SPECIFICATIONS - Models 840, 841 & 845

ACTION

Single pump pneumatic

CALIBER

.177 cal. (4.5mm)

AMMUNITION

BB cal. (4.5mm); .177 cal. (4.5mm) PELLET

BB CAPACITY

350 BBs

VELOCITY

BBS: 335 fps (102mps); PELLETS: 300 fps (91mps)

TARGET DISTANCE BBs: 16.4 ft. (5m); PELLETS: 33 ft. (10m)

MAXIMUM
SHOOTING
DISTANCE*

BBs: 216 yds. (197m); PELLETS: 183 yds. (167m)

WEIGHT

2.2 lbs. (1.0kg)

SIGHTS - FRONT

840,841: Blade and ramp; 845: Hooded with
aperture inserts

- REAR

840,841: Open leaf, adjustable elevation;
845:Adjustable rear peep

BARREL

Smooth bore steel, 19 in. long (48.3cm)

* With muzzle pointed up at the optimum angle.

6

7

Advertising
This manual is related to the following products: