DATOptic uNAS – tNAS - Manual (Page 42)

uNAS/tNAS User Guide Version 1.0 Page 42
LDAP administrator DN you should set previously entered base DN with prefix like "cn=admin,"
(CN - Common Name). Users should be stored in Organization Unit (ou) "People", groups in
"Groups", and computers in "Computers". Sample organization can look like showed below:
Windows (PDC)
In this case NAS server will use Windows Primary Domain Controller user database for user
authentication. This method can be used for NT4/2000/2003 servers. In case Windows
2000/2003 server run ADS native mode, please use Widows (ADS) method.
In case of PDC server running under NT4, please use following procedure if you experience
problem to get connection:
1. Run Server Manager program from Menu Start Programs Administrative Tools
(Common) Server Manager.
2. From Server Manager menu select Computer Add to Domain WARNING: If NAS
resource is already added, you must remove it.
3. In Computer Name field enter NAS Server-Name (NetBIOS name).
4. Click Add button Set Windows (PDC) in NAS.
5. Next, in NAS server web administration: choose “CONFIGURATION” “NAS-Settings”.
6. Choose Windows (PDC) as Authentication method.
7. In Server IP field enter NT server IP address.
8. In Name & Password fields enter NT4 administrator account name and password
9. Click apply button. WARNING: If connection fails, the next try you must restart from point
1.
Windows (ADS)
This option can be used for Windows 2000/2003 ADS servers:
• Please enter Realm name of your Windows 2000/2003 server.
• It can be found under Windows system by clicking right mouse button on My Computer and
selecting Properties, then clicking tab Computer name, Realm name is the Domain name.