DATOptic ARC-1680 Series - Manual (Page 142)

WEB BROWSER-BASED CONFIGURATION
142
6.8.5 SNMP Configuration
To configure the RAID controller SNMP function, click on the “Sys-
tem Controls” link. The “System Controls” menu will show avail-
able items. Select the “SNMP Configuration” item. This function
can only set via web-based configuration.
The firmware SNMP agent manager monitors all system events
and the SNMP function becomes functional with no agent software
required.
• SNMP Trap Configurations
Enter the SNMP Trap IP Address.
• SNMP System Configurations
About community, please refer to Appendix C of SNMP commu-
nity name. The system Contact, Name and Location that will be
shown in the outgoing SNMP trap.