Despatch Protocol Plus Controller (Heat Only) - Manual (Page 50)

A PPENDICES Protocol Plus Owner’s Manual
50 Version 2
Copyright © 2010 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
8.1.5. Control Page Default Values
Menu Item Display Default Range Setting
Cycle Time Control Cycle
Time 1 1 to 60 seconds
High limit setpoint Control Hi-Lim
SP Max
HiLimSP MinHiLimSP – MaxHiLimSP
24
High limit band Control Hi-Lim
Band Off Off, 3°C to 11°C (5°F to 20°F)
Power fail recovery Control PwrFRec Stop Stop, Restart, Hold, Resume
Recovery time limit Control
PwrFTime 00m00s 00m00s to 99m59s
Powerup start
enable Control EPwrStrt Dis Dis, En
Powerup Start
Mode Control StrtMode Off Off, Manual, Timer, Pro-1 to
Pro-8
Hysteresis Control Hyst 3°C 1°C to 56°C (1°F to 100°F)
Process out low Control RetOutLo 80°C -73°C to 760°C (-100°F to
1400°F)
Process out high Control RetOutHi 400°C -73°C to 760°C (-100°F to
1400°F)
Time scale Control
TimeScale hh:mm hh:mm or mm:ss
Key press beep Control KeyBeep On On or Off
End of cycle beep Control EOCBeep Off On or Off
Alarm beep Control
AlarmBeep Off On or Off
8.1.6. Communication (Optional) Page Default Values
Menu Item Display Default Range Setting
Address Communication
CommAddr 1 1 to 247
Mode Communication
CommMode OFF OFF, Modbus
Baud rate Communication Baud
Rate 19.2K 2400, 4800,
9600, 19.2K,
38.4K
Parity Communication Parity None None, Odd, Even
24 See Enable Page (5.6.11)