DIGIWEIGH DWP-10000F Series - Manual (Page 14)

13
NAME/CODE DESCRIPTION CODE/VALUE
A1
Baud Rate Selects the baud rate for data transmission through the
serial port.
1200
2400 4800
9600√
19200
A2
Data Bits and
Parity Selects the number of data bits and parity of serial
transmission. "8n"=8 data bits with no
parity bit and one stop bit.
"7O"=7 data bits with odd parity bit and one stop bit.
"7E"=7 data bits with even parity bit and one stop bit.
"7n"=7 data bits with no parity bit and two stop bits
8n√
7O
7E
7n
A3
Mode of
Serial
Transmission Selects when data will be sent out of the serial port to a
printer or computer.
"C" = Continuous mode; send data continuously
"d" = Demand mode; send data when a PRINT
command is issued from the printer, computer, or
indicator.
C
d√
A4
Display
Check Actuates the function that illuminates all digit segments,
decimal points, and LCD annunciators in a test
sequence. Pressing the ZERO key to scroll down one
level begins the test sequence.
Press ZERO key
to begin
sequence
A5
Disable the
lb/kg Key Allows the lb/kg key to be disabled so that an operator
cannot accidentally press the key and change the
display units.
"0" = Disable the lb/kg key "1" = Enable the lb/kg
key
0
1√