Doug Fleenor Design NODE4 User Manual
Page 3
DMX PORT SPECIFICATIONS
Port circuit:
EIA-485 transceiver with 120 ohm termination between Data+ and Data-
NOTE: This product uses slew-rate-limited output drivers. Slew-rate-limited
drivers minimize EMI and reduce reflections.
Input signal:
0.2 Volts minimum, 12 Volts maximum
Output signal:
1.5 Volts (minimum) into 120 Ohm Termination
Connectors:
Female Neutrik DL-series gold plated 5 pin XLR
(standard female connectors, male on request)
Port protection:
+60V continuous, +15KV transient
Isolation:
600 Volts
ETHERNET SPECIFICATIONS
Ethernet circuit:
100BASE-TX Fast Ethernet, MDIX, and Auto Negotiation
Connector:
Neutrik Ethercon
Isolation:
1500 Volts
MAIN SPECIFICATIONS
Power input:
6W, 100 to 240 VAC 50/60 Hz
Color:
Front/Back: Black
Top/Bottom/Sides: Silver hammertone
Size and weight:
10.375" deep, 1.7" high, 16.5" wide 6 pounds
3 of 15