Dovado GO - Manual (Page 20)

T h e M o b i l e C h o i c e f o r y o u r B r o a d b a n d I n t e r n e t
Reference Manual 7.1.5 20
© 2014 Dovado FZ-LLC
Close the web browser and wait until the router has restarted. The router is now ready to use.
3.10.5 Configurations
This function allows you to create, as well as restore, the working configuration of your Dovado
router. Each backup you save to your computer will contain all the configuration parameters you
have entered in your router.
Should you have performed a factory reset to clear out all your settings, you can then restore your
settings by uploading your saved configuration file via this interface.
To save the current configuration of your router to your computer, go to Upgrade->Configurations,
then simply push the Download button. To restore your configuration, click on Browse (to locate the
file on your computer), and then push Upload.
Tip: The configuration file which you download from your Dovado router can also be used on other
routers of the same model and firmware revision. This can come in handy if performing a mass-
deployment of clone configurations.
3.11 BUTTONS
Enable or disable the various buttons and switches on your router.
3.11.1 Button Settings
The following buttons and switches are manageable:
Note that all switches are deactivated if the router is using factory default settings.
USB On/Off: Enable switch to power the USB modem/port On or Off.
WLAN On/Off: Enable button to control the Wireless LAN (WLAN) On or Off. When pressing the
button, the router will toggle between the On or Off mode. The current mode of operation is visibly
indicated by the WLAN LED on the top-side of the router.
WLAN Scan: This button will instruct the router to perform a fresh scan of your surrounding WLAN
environment and select a vacant (less congested) channel. You may then notice an improved
performance along with minimized interference from neighboring wireless networks.
3.12 RESTART
Push Restart in order to restart the router and initiate all the settings you have saved within the
menu.
3.13 LOGOUT
Normally, the login session will expire after 10 minutes of no activity. Should you wish to manually
terminate the login session, then click on Logout