Dreams Bruges Bedstead King Size - Manual (Page 5)

5 of 6
ASSEMBLY
1) Assembly of the front panel onto side
frame.
ng panel onto
1) Slot in the Drawers.
NOTE: Slats not supplied shown
for reference only.
Both slats on “step 9---step 12”
can be assembled to the
bedstead. You can make a
choice between the two slats.
1) Support leg height have the four
position, you can adjust according to the
bed height to choose the right position to
fix in the “STEP 9”.
2) If need, you can adjust by screwing in or
out the support leg leveler at the bottom.
STEP 9
STEP 8
○
1
○
2 ○
3
○
4
Select correct height for your bedstead
STEP 7