Dreams Treviso Bedstead - Manual (Page 4)

4 of 5
ASSEMBLY
NOTE: Slats not supplied shown
for reference only.
Both slats on
“step 3---step 6”
can be assembled to the
bedstead. You can make a
choice between the two slats.
1) Support leg height have the four
position, you can adjust according to the
bed height to choose the right position to
fix in the “STEP 3”.
2) If need, you can adjust by screwing in
or out the support leg leveler at the
bottom.
1) Use the bolt ( F ) to fix the leg (5&6) onto
the slats frame ( 4 ).
1) Carefully locate the slats frame onto
the bed.
1) Use bolt (A) and Jcn nut (B) to fix the
Slats frame onto the bed.
STEP 3
STEP 4
STEP 5
○
1
Select correct height for your bedstead
○
2
○
3
○
4
* 8