Dreams Piccadilly TV Bed - Manual (Page 7)

Bed Assembly
Page 7 of 9
EITHER 12 OR 13 WILL BE SUPPLIED - BOXED SEPARATELY.
Stage
7a
UPGRADE SPRUNG SLAT SYSTEM
13
Q
P
Q
13
I x4
J x4
H x4
O x8
Open the metal slat frame and lay face down on the working
surface.
Fit the support legs ( P & Q) to the positions shown, securing
with the bolts ( O). Fully tighten using the allen key (K).
Carefully turn the slat frame over, and position onto the metal slat
support rails. Align the frame with the fixing holes at each
end of the rail and secure using just 4 sets of the bolts ( H),
washers ( I) and sleeve nuts (J). Fully tighten using the allen key (K).
Finally, please ensure that all bolts are fully tightened
before the bed is used.
13
13