Dreams Kiera Bedstead - Manual (Page 4)

4 of 5
ASSEMBLY
NOTE: Slats not supplied shown
for reference only.
Both slats on
“step 3---step 6”
can be assembled to the
bedstead. You can make a choice
between the two slats.
1) Support leg height have the four position,
you can adjust according to the bed
height to choose the right position to fix
in the
“STEP 3”.
2) If need, you can adjust by screwing in or
out the support leg leveler at the bottom.
1) Use the bolt to fix the legs onto the slats
frame.
1) Carefully locate the slats frame onto the
bed .
2) Use bolt ( D )and Jcn nut ( E ) to fix the
slats frame onto the bed.
See step.5.
STEP 3
STEP 4
○
1
○
2
○
3
○
4
Select correct height for your bedstead
* 8
STEP 5