Input command description, 2 adjustment and operation – Eberspacher Calltronic User Manual
Page 7
VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 7
inpuT COMMAnD DesCRipTiOn
input command Description
sTART
heater is switched on.
sTOp
heater is switched off or the preset time is deactivated.
sTARTXXXX
The start of heating can be preselected once up to 24 hours in ad-
vance.
For example: sTART0830
The heater punctually switches on at 08:30 h in the morning. After the
input, you receive an sMs as confirmation, with the heating start time
and the current time. The start time can be changed with a new sMs
or deleted by sending the sTOp command.
The button installed in the vehicle can also be used to delete the
preselected start time for heating mode. keep the button pressed for
approx. 3 sec, the start time is deleted.
suMMeR
Calltronic switches from “heating” function to “Ventilation” function.
WinTeR
Calltronic switches from “Ventilation” function to “heating” function.
PlEasE NotE!
enter input command in one word, with-
out space. There is no differentiation
between upper and lower case text.
in the event of input errors, if not deac-
tivated (see
), feedback is sent by
sMs.
The temperatures given in several feed-
back messages are guideline values.
2 ADjusTMenT AnD OpeRATiOn