Environmental Express AutoBlock Plus - Manual (Page 27)

Environmental Express, Inc.
www.envexp.com 27
10. WARNINGS AND NOTIFICATIONS
10.5 Electrical requirements
10.5.1 – Voltage: 120V, ~60Hz, 12A (Domestic)
10.5.2 – Voltage: 230V, ~50HZ, 6A (INTL)
10.5.3 - Power should not vary greater than 10%. Use the supplied power cord or equivalent to
connect to the power supply. For safety reasons, a separate power receptacle should be provided
for each SPE-Express. Do not use extension cords or outlet adaptors. Make certain that power
outlets are earth-grounded at the grounding pin.
10.6 This equipment is designed to be used with the original factory equipment.
Any components or replacement parts need to be sourced through environmental express. Any other
components that are used may violate warranty or intended use of the unit.
10.7 Equipment or components having a mass of 18kg or more will require the use of multiple
persons or equipment for lifting and carrying to desired positions. This is a safety requirement. The
unit weight exceeds 18kg and requires multiple people for lifting.
10.8 Warning labels
10.8.1 - FOR THE CONNECTION OF INERT GAS.
10.8.2 - Hot surface in the interior chamber
10.8.3 - Check power requirements before use. Voltage and fuse should be in accordance
with supply.
10.9 This equipment is designed to operation in following environmental conditions
10.9.1 – Ambient temperature: 5° C - 30°C
10.9.2 – Ambient relative humidity: 0-85% RH
10.9.3 – Altitude: sea level to 2400 meters
10.10 This equipment needs to be used in conjunction with an electrical surge protector. The
electrical surge protector needs to be rated accordingly to the source supply. The main power cord of the
unit should be interfaced with the surge protector.
10.10.1- Power should not vary greater than 10%. Use the supplied power cord or equivalent to
connect to the power supply. For safety reasons, a separate power receptacle should be provided
for each SPE-Express. Do not use extension cords or outlet adaptors. Make certain that power
outlets are earth-grounded at the grounding pin.
10.11 This unit may need periodic cleaning depending on usage.
An acid neutralizing cleaner is recommended for acid sample preparations.