Eschenbach Optik iQon Agilo - Manual (Page 19)

Page 19
VIDEO CONTROLS
BRIGHTNESS
CONTRAST
SATURATION
CAMERA SEARCH
FACTORY DEFAULTS
EXIT MENU
6. The Configuration Menus
Press and hold the Mode button for 2 seconds to pop up the
configuration menu. The menu displayed is dependant on what mode
you are in. When in video camera mode or split screen mode the Video
Controls menu will be displayed. When in PC/VGA mode the PC Menu
will be displayed. Each menu has different functions relevant to the
mode you are in.
Note that the split and any enhanced functions such as shutters or line
markers will disappear when the menu is displayed. After exiting the
menu these settings will be restored.
6.1 Menu Navigation
Use the Zoom buttons
+
to move up and down the menu. The
current menu item will be highlighted. Press the Mode button to
proceed when you have highlighted the desired item.
You can press the Function button
at any time to exit the menu.
6.2 The Video Controls Menu
Refer to figure below. The items in the Video Controls menu are
explained below.
Brightness: This control affects the overall level of light coming
from the image. The brightness settings for photo mode and the
reading modes are independent and stored separately. Note that
brightness control is not available in semicolor mode.