Eschenbach Optik Prisma HD - Manual (Page 4)

Page 4
Prisma HD English Rev 1.00
Power on the Prisma HD by pressing
the power button on the right of the
control panel.
You should have an image on the
TV. If not, use your TV’s remote
control or control panel to switch to
the appropriate HDMI input used for the Prisma HD
25cm - 30cm
Raise the camera so that it is roughly 25 to 30 cms above
the table. If it is too far or too close to the text the camera
will not be able to focus correctly.