N o t e – ETC Ion User Manual
Page 99
4
Patch
83
Ion will display the following information that it receives from the dimmers:
•
Address
•
Channel
•
Label
•
System
•
Rack
•
Lug
•
Properties
•
Module Type
•
Firing Mode
•
Control Mode
•
Curve
•
Loads
•
Recorded Loads
With a dimmer or dimmers selected, you can edit various dimmer settings in the property view,
which will display in the CIA. Items with a caret (>) are editable. When multiple dimmers are
selected together for editing, an “*” will show for data that is different between the selected
dimmers.
FDX dimmers will not display data for the following:
•
Recorded Load
•
Actual Load
•
Rack Dimmer Source
•
Threshold
•
Scale Minimum
•
Preheat Enable
•
Preheat Timing
•
AF Enable
N o t e :
The System ID number from CEM3 is not currently supported.
N o t e :
Rack numbers and dimmer numbers need to be unique for Ion to properly
recognize them. For CEM+, dimmers also need to be patched to different sACN
addresses.
N o t e :
When dimmers are discovered, they are not automatically attached to patched
channels in Ion; you must attach a dimmer to a channel.