ETC Eos v1.3 - Manual (Page 126)

112 Eos Operations Manual
Color Control
Depending upon the specific device, color
can be established manually with the
encoders using:
• CMY color mixing
• hue and saturation color mixing
• RGB color-mixing
• selection from a color wheel or
scroller
You may also specify color by using the
hue and saturation (HS) color picker.
It is also possible to set non-intensity
parameter data with direct entry using the
control keypad and using the parameters
on the CIA.
• [1] [At] [4] <0> {Cyan} [5] [5]
[Enter]