ETC Unison Mosaic Tessera Rack Mount - Manual (Page 2)

E T C I n s t a l l a t i o n G u i d e
Mosaic Tessera Rack Mount Kit
Tessera Rack Mount Kit Page 2 of 2 Electronic Theatre Controls, Inc.
.
Step 4: Mount the panel into the 19” equipment rack.
a: If your equipment rack has threaded holes, use the four
provided screws to mount the panel to the rack rails.
b: If your rack does not have threaded holes, use the provided
clip nuts in the four screw hole locations; top and bottom of
each side of the rack rails.
Step 5: Connect the Cat5e cable to the Tessera Controller as shown in
the graphic on the previous page.
N o t e : If connecting to building wiring, follow the instructions provided with the Cat5
termination kit. A Cat5e cable has been provided for connection between the
termination kit and Tessera Controller.
Clip nuts