ETC Unison Paradigm Central Control Server Setup Guide - Manual (Page 4)

E T C S e t u p a n d C o n n e c t G u i d e
Paradigm Central Control Server
Paradigm Central Control Server Setup and Connect Guide Page 4 of 4 Electronic Theatre Controls, Inc.
• configure the date and time (the P-CCS acts as a time server to the connected Paradigm
Architectural Control Processors)
• setup an automatic or manual backup of the Server Project Config file (*spcf) log data to the
connected Net3 Conductor
• download the Paradigm VTS installer file
View the P-CCS built-in web help, viewed by selecting “Help” from the web interface menu.
Net3 Conductor
The Net3 Conductor default IP Address is 10.101.50.60 and Subnet mask is 255.255.0.0.
The Net3 Conductor web user interface allows for local interface and configuration of the Net3
Conductor Network Services Gateway.
The web interface provides the following features:
• access to view and set the network IP mode
• access to set and monitor the services provided over the network; such as DNS server, NTP time
server, set file sharing access, and the DHCP server
• ability to enable logging features, including saving and clearing data and setup of log backup
destinations
• generate a backup of the current configuration and upload a configuration
• ability to upgrade Net3 Conductor software
Reference the Net3 Conductor built-in web help, viewed by clicking “Help” from the navigation links on
the left of the web interface.