ETC Unison Paradigm Touchscreen - Manual (Page 9)

Touchscreen Setup Menu 7
Touchscreen Setup Menu
How a Touchscreen behaves when it is powered depends on two things:
1 Is a ControlDesigner configuration file loaded onto the Touchscreen?
2 Is the Touchscreen bound/connected with the P-ACP?
When both of these are true, and the Touchscreen is powered, the configuration will load
to the home page of the selected configuration.
On initial power-up, with no ControlDesigner configuration installed or when the
Touchscreen is not bound/connected to a processor, the Touchscreen displays the default
splash page; which includes the ETC logo and two buttons; [Setup] and [Service Pin].
Pressing the [Setup] button accesses the Setup Menu where setup options and technical
information are displayed. Pressing the [Service Pin] button issues a binding request to
the Paradigm Architectural Control Processor over the control network. When the
Touchscreen is bound/connected to a processor, a configuration file will begin to load.