ETC Matrix MkII Dimming System - Manual (Page 39)

34
RETURN TO FACTORY SETTINGS
ARE YOU REALLY SURE? [NO]
CANCEL SAVE
3. Use the rotary encoder to choose either YES (clears memory) or NO (no
action).
4 Press SAVE to leave the menu and reset the dimmer or CANCEL (to leave the
previous settings unchanged).
Factory defaults are:
AUTORELOAD: NO
CHANNEL CONFIGURATION: joined
CURRENT: 43A
CURRENT LIMITATION: off
CURVE LINear
DMX-1 ADDRESS: 001
DMX-1 BACKUP: all 00
DMX-1 FAIL: reset
DMX-2 ADDRESS: 000
DMX-2 BACKUP: all 00
DMX-2 FAIL: reset
DMX SYSTEM: individual
DMX MINIMUM RESET: off
FREQUENCY: 50Hz
LAMP SAVER ON
LAMP TUNING ON
LOAD SELECTION: all 2.5kW
MANUAL PRESETS: all 00
MAXIMUM: 100%
MINIMUM: 0%
MODE basic
NON-DIM (I/O) no
PASSWORDS: all 0000
PC ADDRESS: 00
PHASE off
PRESET-1: CH-1 @F only
PRESET-2: CH-2 @F only
PRESET-3: CH-3 @F only
PRESET-4: CH-4 @F only