Appendix a: specifications, Net3 two port gateway control features, Net3 two port gateway specification – ETC Net3 Two Port DMX Gateway User Manual
Page 10: General, Network, Dmx connections, Appendix a, Specifications, General network dmx connections
6
Net3 Two Port Gateway Setup Guide
Appendix A: Specifications
Net3 Two Port Gateway Control Features
•
Distributes DMX over Ethernet
•
Supports ETCNet2 and Net3/ACN protocols
•
Distributes DMX data to any input/output device such as dimmers, scrollers, moving
lights and DMX consoles
•
Modular DMX/RDM port design allowing easy configuration of port connector type and
replacement
•
DMX512 via XLR 5-pin Male, XLR 5-pin Female connectors
•
LCD screen for labeling, status and configuration indicators
•
LED power and network indicators
•
Supports Power over Ethernet (PoE) and an external DC power supply
•
Versatile compact size
•
Configurable via Network Configuration Editor software (NCE) or directly through ACN
Net3 Two Port Gateway Specification
General
•
USITT DMX512/512A and ESTA ACN standards supported
•
Supports ETCNet2 and Net3/ACN protocols
•
ETL/cETL approved (Tested to UL Standards by ETL)
Network
•
Complies with IEEE 802.3i for 10BASE-T, 802.3u for 100BASE-TX and 802.3af for
Power over Ethernet specifications
•
Data transport utilizes TCP/IP suite of protocols
•
Distributes DMX over Ethernet to any input/output device such as dimmers, scrollers,
moving lights
•
2048 DMX In or DMX Out channels
•
Configurable to over 32,000 EDMX addresses (Running ETCNet2 software)
DMX Connections
•
2 DMX ports
•
Switch for DMX termination (internal access only)
•
Connector options include:
•
Two XLR 5-Pin Male DMX input connectors
•
Two XLR 5-Pin Female DMX output connectors