EUCHNER MGB-LxxB-PNx-xxx (PROFINET) with Data Structure Type B - Manual (Page 2)

Operating Instructions Safety System MGB-L..B-PN.-... (PROFINET)
2
Contents
Scope 3
Correct use
3
Exclusion of liability and warranty 4
General safety instructions 5
Function 6
Interlocking module MGB-L0.B-PN. 6
Locking modules MGB-L1.B-PN. and MGB-L2.B-PN. 6
Control of the guard locking 7
System overview 11
Bus module MGB-B-...-PN 11
Evaluation module MGB-L.- 12
Handle module MGB-H-... 12
Escape release MGB-E-... (optional) 13
Dimension drawing 13
Mechanical release 14
Lockout mechanism 15
Escape release (optional) 15
Mounting 17
Mounting color cover 17
Changing the actuating direction (here: from right to left) 19
Controls and indicators 21
Protection against environmental effects 22
Electrical connection 22
Connections on bus module 22
Setup 24
Integrating into PROFINET and PROFIsafe 24
Replacement of an MGB system without programming device 25
System reset to factory settings 25
Teach-in operation (only MGB unicode) 26
Mechanical function test 26
Electrical function test 27
PROFINET data bytes (data blocks for unsafe functions) 28
Data blocks for MGB modules 29
Data blocks of individual functions at a glance 31
PROFIsafe data bytes (data blocks for safe functions) 34
Diagnostic messages of the MGB system 36
PROFINET alarms 37
Fault in stacklight module 37
System status table LEDs on interlocking/locking module 38
Technical data 39
Troubleshooting 40
Latching fault when actuating the escape release 40
Fault reset 40
Service 41
Inspection and service
41
Declaration of conformity 42