Bosch LHM0610 - Manual (Page 11)

PL0950908 Non Latching Type
PL0951108 Latching Type
• Eliminates the need for
plug-in circuit breakers
• Extra fast action: Trips
out within 40ms
• Automatically
disconnects both Live and
Neutral connections leaving
the earth connection intact
• Test button for safety
checks
• Protection is maintained
497928
PL0950508 Non Latching Type
PL0950608 Latching Type
• Eliminates the need for plug-in circuit
breakers
• Extra fast action: Trips out within 40ms
• Automatically disconnects both Live
and Neutral connections leaving the
earth connection intact
• Test button for safety checks
• Protection is maintained when Neutral is lost or
with pulsating DC earth fault currents
• Trips out when the power supply is temporarily lost
• Supplied with a 40mm BS metal surface wall box
497927
All Prices Exclude VAT
TRADES - WHAT YOU NEED AT LOW PRICES 11
In-Line RCD Unit
• Rewireable RCD unit
• Splash proof design
• Protects users from electric
shocks when operating
faulty or damp equipment
481475
RCD Adaptor
• Safety RCD adaptor that continuously monitors
the power supply to an electrical appliance
• Cuts off the power in less than 30ms if an earth
current fault is detected
• This is fast enough to prevent a fatal electrical
shock
480892
PL0950308 Non Latching Type
PL0950408 Latching Type
RCD Single White
Sockets
A range of single white RCD protected sockets for new
installations or to replace existing
sockets. The RCD sockets will
provide protection against electric
shocks and fires when operating
home appliances, gardening
equipment, power tools and
industrial machines/equipment.
Units fully comply with BS7288 and BS1363.
Operation: The RCD units will detect potentially dangerous faults by
monitoring the integrity of the mains supply and will break the circuit
instantaneously if a fault occurs, minimising the risk of potentially fatal
electric shocks. Non-latching and Latching types are available.Non-
latching types require manual reset to restore power after the power
supply is temporarily lost (a must for power tools).Latching types
immediately restore power following a power cut.
• Eliminates the need for plug-in circuit breakers
• Extra fast action: Trips out within 40ms
• Automatically disconnects both Live and Neutral connections leaving
the earth connection intact
• Test button for safety checks
• Protection is maintained when Neutral is lost or with pulsating DC
earth fault currents
• Trips out when the power supply is temporarily lost
497926
1+ 3+
PL0950708 Non Latching Type £22.98 £21.05
PL0950808 Latching Type £23.05 £21.15
RCD Double
White Sockets
• Eliminates the need for plug-in circuit breakers
• Extra fast action: Trips out within 40ms
• Automatically disconnects both Live and Neutral connections leaving
the earth connection intact
• Test button for safety checks
• Protection is maintained when Neutral is lost or with pulsating DC
earth fault currents
• Trips out when the power supply is temporarily lost
495705
RCD Double Metal
Sockets
RCD Single Metal
Sockets
Technical Data
Operating voltage 240V AC
Max. Current rating 13A
Trip current 30mA
Trip time 30ms
1+ 5+
£4.32 £3.79
order code PL1005108
Technical Data
Voltage Rating 240V 50Hz
Maximum Current 13A
Maximum Load 3200 Watts
Rated Trip Current 30mA
Trip time <30mS
Protection IP40
Approvals B7071:1992, BS1363, BSEN 605289:1992
1+ 5+
£4.98 £4.25
order code PL1018908
when Neutral is lost or with
pulsating DC earth fault currents
• Trips out when the power supply is
temporarily lost
1+ 3+
£21.45 £19.74
1+ 3+
£26.69 £25.03
1+ 3+
£24.69 £21.84