EUCHNER CES-AP-C01-AH (Unicode) - Manual (Page 2)

Operating Instructions Safety Switch CES-AP-C01-AH
2
Contents
About this document 3
Correct use 3
Possible combinations for CES components 4
Exclusion of liability and warranty 4
General safety instructions 5
Function 6
Changing the approach direction 7
Mounting 8
Electrical connection 9
Notes on operation with safe control systems 10
Devices for direct connection to IP65 field modules 10
Safety in case of faults 11
Fuse protection for power supply 11
Requirements for connection cables 12
Connector assignment, safety switch CES-AP-C01 12
Connection 13
Connecting CES-AP-...-SB-... (pin 5 not assigned) to a decentralized peripheral system
(e.g. ET200pro series from Siemens) 14
Setup 15
LED indicators
15
Teach-in function for actuator 15
Functional check 16
System status table 17
Technical data 18
Technical data for safety switch CES-AP-C01-AH 18
Technical data for actuator CES-A-BBA 20
Technical data for actuator CES-A-BPA 22
Technical data for actuator CES-A-BRN 24
Ordering information and accessories 26
Inspection and service 26
Service 27
Declaration of conformity 28