EUCHNER ZSE - Manual (Page 4)

Operating Instructions Enabling Switch ZSE
EUCHNER GmbH + Co. KG Kohlhammerstraße 16 D-70771 Leinfelden-Echterdingen Tel. +49 711 7597-0 Fax +49 711 753316 www.euchner.de [email protected]
Fig. 3: Dimension drawing, enabling switch ZSE
Subject to technical modifications; no r
esponsibility is accepted for the accuracy of this information. © EUCHNER GmbH + Co. KG
092780-03-12/13 (translation of original operating instructions)
Fig. 1: Function of the switching elements
ZSE2-1 ZSE2-2 ZSE2-3 ZSE2-4
Switching
element
Travel
diagram
Contacts open
Contacts closed T Actuating point
Type
Fig. 2: Diagram of actuating force as a function of actuating travel
0 2 4 6
10
20
30
40
0
a
b
1 3 2
Actuating travel [mm]
Actuating for
ce appr
ox. [N]
Front panel cut-out
D30 according to EN 60947-5-1
Cut-out for protection against
twisting
Not absolutely necessary,
locking pin can be removed
from ZSE.
only ZSE2-3 and ZSE2-4