Euramco Safety HA03 - Manual (Page 2)

PN: PI-0003 Rev. B 9/09
WARNINGS
•
NOT FOR USE WITH LIQUID PROPANE. FIRE COULD RESULT.
• PROPANE GAS (I
3P
) ONLY (37mBar)
• HOT SURFACES! KEEP EXHAUST AREA CLEAR!
• May automatically start/stop if equipped with thermostat, or if over heating or air blockage
• Keep Propane Cylinder Away From Heater.
• Water certification IP22
• Not for home or recreational vehicle use.
• The hose and regulator should be protected from traffic, building materials and contact with hot surfaces both during use and
while in storage.
• Failure to comply with the precautions and instructions provided with this heater can result in death, serious bodily injury and
property loss or damage from hazards of fire, explosion, burn, asphyxiation, carbon monoxide poisoning, and/or electrical shock.
• Fire, burn, inhalation, and explosion hazard.
• Keep solid combustibles such as building materials, paper, or cardboard a safe distance away from the heater as recommended
by the instructions.
• Never use the heater in spaces which do or may contain volatile or airborne combustibles, or products such as gasoline, solvent,
paint thinner, dust particles or unknown chemicals.
CERTIFICATION
Gastec Certification B.V. declares that the Portable Construction Heaters, types HA02 and HA03, made by Euramco
Safety, Inc. in Spring Valley, CA, U.S.A., meet the Essential Requirements as described in the Directive on appliances
burning gaseous fuels (90/396/EEC)
. Appliance type B
23
, Gas category I
3p
WARRANTY
GENERAL WARRANTY
Euramco Safety warrants the Inline Heater against defects in material and workmanship for a period of 12 months from the date of
original purchase. Authorization for warranty repairs must be obtained from the factory. There are no other warranties expressed or
implied.
WARRANTY AND SERVICE
1) There are two types of services available for Euramco Safety products:
a. Warranty Service : Service is available in accordance with the warranty of the product line. The warranty is valid from the
time the unit was put into service by the end-user but in no case longer than 24 months from the time the unit was shipped from
Euramco Safety stock. All warranties by Euramco Safety are for defects in workmanship and materials and the liability is limited to
repair of these defects and or replacement of the item.
**For verification purposes the serial number of the unit and proof of purchase will be required.
b. Non-Warranty Service: Service is available from our factory or authorized service center. Rates for service, spare parts
pricing, etc. can be obtained directly from Euramco Safety or Hobrand BV.
2) Validation of Warranty : Validation consists of a simple check of our serialized records to insure validity of the warranty. The
customer can find the serial number affixed to the unit on a serialized sticker. Additionally dealer or distributor records can be
consulted to determine date of sale. In most cases the serial number is sufficient unless a considerable amount of time has passed
since the item left Euramco Safety stocks.
3) Authorization to Return for Service:
Once the item has been successfully validated as under warranty, a return for service
authorization will be issued to the customer. Please insert a copy of this document into the return shipment in order to expedite
repairs.
4) Freight Policy:
Freight to return goods for service will be paid for by the company making the return.
5) Repairs and Determination of Warranty: After receipt of goods in which an authorization to return for service has been issued,
the goods will be evaluated to insure the required repairs are actually warrantable.
a. If so, the goods will be repaired and dispatched back to the customer as expeditiously as possible. Credit for
incoming freight will be made only to authorized dealers as a credit on account and shall be an amount equal to the current rate to
ship via UPS Ground from the customer to the repairing facility.
b. If not, an estimate will be made and forwarded to the customer for his review and approval. Upon approval the goods will
be repaired and sent back to the customer.
6) Place of Repair:
Repair and Warranty services in Europe can be obtained at our authorized service center in the Netherlands.
Hobrand BV
Industrieweg 24
4153 BW Beesd
Netherlands
Tel:
+31 (0) 344-663344
EURAMCO Safety Inc. ▪ 2746 Via Orange Way, Spring Valley, CA 91977 ▪ Tel. 800 472-6326 ▪ Fax 619 670-7345
Email: [email protected] ▪ Web:: www.euramcosafety.com