Ewbank Сascade 280 - Manual (Page 3)

How to fill
Turn the filler cap at the top of the tank 1/4 turn to the right and
remove. (Fig.2)
Markings on tank
Add water to the water level marked on the tank then add
shampoo to the shampoo level (Fig.3) for cleaning large areas
Replace the filler cap and turn 1/4 turn to the left.
If spot cleaning, mix shampoo and water at a 10 oz water to 1 oz
shampoo.
Press the handle release
Press down on the top of the handle release button then extend
the handle by gently pulling upwards until handle locks in place.
(Fig.4)
Using the trigger
When the handle is locked in positions you will feel a spring
loaded action in the trigger. (Fig.5)
Cleaning
Squeezing the trigger will release the valve in the head of the unit
allowing the shampoo and water mixture to be applied to the
foam roller. Using short overlapping strokes the mixture will be
applied to the carpet or rug –
DO NOT OVERWET the cleaning
area. (Fig.6). Releasing the trigger will stop the flow of
shampoo/water mixture. After use let the carpet or rug dry
completely, then vacuum or use your carpet sweeper to remove
the deposits lifted by the foam shampoo.
Note: the drying of the carpet takes generally 3-4 hours.
How to use your Ewbank
2
2
3
4
5
6
CASCADE LEAFLET 2 6/23/06 1:36 PM Page 4