EZWatch EZBR-0519 - Manual (Page 4)

4
bottom cover and plug into the RJ45 Jack inside the unit. Keep the
black gasket material in the bottom of the cover to help keep out dust
and insects.
STEP 6: Route CAT5 cable from the antenna into the building. Always
create a strain relief near the antenna so the cable is not pulling directly
on the antenna. Use the CAT5 strain relief hook feature built into the
housing back fin. The Ethernet spec allows for a maximum cable length
of 100 meters or about 328 feet.
STEP 7: Install the RJ45 connector on the POE Inserter to the router,
switch or computer. Attach the CAT5 cable from the antenna to the
RJ45 output port of the POE Inserter. Insert power supply DC plug to
the POE Inserter DC Jack. Plug the power supply into a surge pro-
tected AC power source to power up the EZ-Bridge
™
Software Settings
We strongly recommend that you create a working plug
and play link before making ANY changes to the soft-
ware settings
1. There is an HTML management system built into every EZ-Bridge™
unit which is accessed thru a standard web browser. The unit can com-
municate thru the CAT5 ethernet cable connection or thru the wireless