EZWatch Evolution - Manual (Page 87)

Edit mode/ Operate mode
Switch button
Function button
6.1 Edit Mode
All E-map modifications must be configured in Edit Mode.
6.1.1 Add/Edit/Delete Map
Add E-Map:
Step 1: Click on the switch button to switch to Edit mode. Make sure all devices are connected and
setup properly.
Step 2: Right click on the Map icon in device and map list to obtain the option menu to add map, or
just click “Add Map” button to obtain the “Map Config” dialog.
Step 3: Select the map file and insert the map name. Click OK, and then the map you added appears in
the tree structure of device and map list.
Step 4: The map indicator appears on the left-up corner of parent map. Drag it to the position you want
on appointed map.
Edit E-Map:
Step 1: Make sure you are in Edit mode and all devices are connected and inserted.
Step 2: Right click on the “Map ” icon to obtain the option menu to edit map, or just click the “Edit
Map” button to obtain the “Map Config” dialog.
Step 3: Modify the required details, and then click OK to save configuration.
Delete E-Map:
Step 1: Make sure you are in Edit mode and all devices are connected and inserted.
Step 2: Right click on the “Map ” icon to obtain the option menu to delete map, or just click the Delete
button to remove appointed map from list.
Note: The root map cannot be deleted .