EZWatch Pro 1.1u - Manual (Page 38)

EZWatch Pro 37
© 2001-2002 Automated Video Systems
5.13 Setting up the sound alarm
There is a "Sound Recorder" application on Windows 98SE or above. The "Sound Recorder" enables
you to record a sound file that you
would like to use, once the motion detection is triggered.
You can make a warning sound fill channel by doing the following steps:
You can use the "Sound Recorder" application by clicking on the "Record" icon and then the
application will be displayed as below:
To record a sound
1. Make sure you have the audio input device or the microphone connected into your computer.
2. On the "File menu", click "New file".
3. To begin recording, click the "Record" button.
4. To stop recording, click the "Stop" button.