Flex RhinoBond Project User Manual

Best practices, How to run a flex rhinobond

Advertising
background image

Best

Practices

REVISED AUGUST 2012

How to Run a Flex RhinoBond Job • Page 1

Think OuTside The seams

With the Flex RhinoBond system, you
have to think differently when it comes to
scheduling and running your job, par-
ticularly when compared to a traditional
mechanically attached installation.
These Best Practice recommendations
are based on several years of Flex
RhinoBond project observation and
evaluation.

It should also be noted that for
improved productivity, a minimum of
two Flex RhinoBond tools should be
used.

FasTener insTallaTiOn

Fasteners MUST be in a straight row in at least
one direction.
The more even the spacing, the easier
they are to find under the membrane, and the faster
the installation.

Straight – good

Random – harder to find

Snap chalk lies to layout grid pattern for corners,
perimeter and field. Build an 8' template bar with grid
measurements marked on it to speed up marking for
chalk lines.

how to run a Flex rhinoBond

®

Job

Advertising