Flint & Walling SP Self-Priming Sprinkler Pump User Manual

Lawn sprinkler, irrigation pump

Advertising
background image

LAWN SPRINKLER, IRRIGATION PUMP

MODEL #, SP10P1, SP15P1, SP20P1

®

95 N. Oak St., Kendallville, IN 46755
260-347-1600 | flintandwalling.com

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product. If you have any questions regarding the product, please call customer service at
1-800-742-5044, 7:30 a.m.-5:00 p.m., EST, Monday-Friday.

DANGER
ELECTRICAL SHOCK HAZARD.

Always disconnect power source before performing

any work on or near the motor or its connected load.

If the power disconnect point is out-of-sight, lock it in

the open position and tag it to prevent unexpected

application of power. Failure to do so could result in

fatal electrical shock.
ELECTRICAL SHOCK HAZARD.

Do not handle the pump with wet hands or when

standing in water as fatal electrical shock could occur.

Disconnect main power before handling unit for ANY

REASON!
RISK OF ELECTRIC SHOCK.

These pumps have not been investigated for use in

swimming pool areas.
WARNING
ELECTRICAL SHOCK ALERT.

Follow all local electrical and safety codes, as well

as the National Electrical Code (NEC) and the

Occupational Safety and Health Act (OSHA).
ELECTRICAL SHOCK ALERT.

Replace damaged or worn wiring cord immediately.
ELECTRICAL SHOCK ALERT.

Do not kink power cable and never allow the cable

to come in contact with oil, grease, hot surfaces, or

chemicals.

ELECTRICAL SHOCK ALERT.

Unit must be securely and adequately electrically

grounded. This can be accomplished by wiring the unit

to a ground metal-clad raceway system or by using a

separate ground wire connected to the bare metal of

the motor frame or other suitable means.
CHEMICAL ALERT.

This product contains chemicals known to the State of

California to cause cancer and birth defects or other

reproductive harm.
CAUTION

ELECTRICAL SHOCK MAY OCCUR

Protect the power cable from coming in contact with

sharp objects.
HOT SURFACE MAY CAUSE BURNS

Be careful when touching the exterior of an operating

motor - It may be hot enough to be painful or cause

injury.
PRODUCT DAMAGE MAY RESULT

Make certain that the power source conforms to the

requirements of your equipment.

023264 E

Advertising