Brother FAX-8650P - Manual (Page 88)

V - 1
1. ENTRY INTO THE MAINTENANCE MODE
FAX3750/MFC7750: To make the equipment enter the maintenance mode, press the Function,
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
FAX-8650P: To make the equipment enter the maintenance mode, press the Menu,
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
The equipment beeps for approx. one second and displays " " on the
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the
equipment is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in Section 2, enter the corresponding 2-
digit function code with the numerical keys on the control panel. (The details of each
maintenance-mode function are described in Section 3.)
NOTES: • Pressing the 9 key twice in the initial stage of the maintenance mode makes the
equipment exit from the maintenance mode, restoring it to the standby state.
• Pressing the Stop key after entering only one digit restores the equipment to the
initial stage of the maintenance mode.
• If an invalid function code is entered, the equipment resumes the initial stage of the
maintenance mode.