Gamber-Johnson 7160-0403 - Manual (Page 2)

Fig. 2
2 of 2
FRONT OF VEHICLE
BASE PLATE UNDER
PASSENGER SEAT
BASE PLATE UNDER
DRIVER SEAT
SPACER PLATE UNDER
DRIVER SEAT
STRUT CHANNELS
.38-16 BOLTS AND WASHERS
.38-16 BOLTS
AND WASHERS
CHANNEL NUTS
SPACER PLATE UNDER
PASSENGER SEAT
Mounting the Workstation, Storage or Console Box (Fig. 2 & Fig. 3)
1. Determine location of equipment between driver and passenger seats.
Bolt strut channels to base plates accordingly, using (4) .38-16 bolts and washers,
supplied in hardware bag. Position strut channels to line-up with mounting holes
in equipment.
2. Place (4) .38-16 channel nuts, supplied in hardware bag, in strut channel and
bolt equipment in place using (4) .38-16 bolts and washers.
Fig 3