Gamber-Johnson 7160-0358 - Manual (Page 4)

Connecting Peripherals
Ensure that all wires have strain relief protection. Strain relief is accomplished by using the Tie Slots
in the Strain Relief Bracket to secure the supplied Cable Ties. Be sure there are sufficient Service
Loops in the cables to remove any stress on the connectors. To assure compliance with FCC, Part
15, Class B rules, only use shielded interface cables when connecting peripherals.
FIG. D
FIG. E
FIG. F
Strain Relief
Bracket
Cable Ties
Service Loops
Cable Ties
4 of 6
Mounting
The docking station can be mounted to any 75mm VESA hole pattern, or to the following
Gamber-Johnson products:
- VESA Adaptor Bracket (7160-0206)
- Wall Mount Bracket (7160-0195)